Worra Lorra Racin’!

May 31, 2009 · Posted in Racing · by simon · Comment 

The RC summer season really felt as if it had started today.  The sun was shining, the grip was high.

There was racing on all over the place, here’s a tiny sample of the racing that friends and others have got up to in the last few days.

  • I raced indoors on Friday night at Dorset
  • Friends raced up at Yately on Saturday
  • I raced today (Sunday) at Yeovil, alongside an excellent Kart meeting
  • Friends raced over at Adur today
  • Friends raced at South Hants (my home club) as usual
  • ‘Facebookers’ raced off-road at Slough (and so did Lewis Hamilton and his little brother Nic!)
  • The worlds best TCers raced at the ETS race in Holland over the weekend (another Tamiya victory)

And that’s just the racing I know about on the grapevine, there will have been dozens and dozens of other meetings all around the country (and around the world) going on this weekend.

It reminds me what a fantastic sport we have, it’s so down to earth and what makes it is us, the racers. WE are the the sport!

So wherever you raced, in whatever class, remember, it’s just a sport, it’s just some fun, keep it enjoyable and don’t ever forget how privileged we are to be able to do it.

Written by simon.

Nationals Update – Numero Uno

May 29, 2009 · Posted in Racing, Touring Cars · by ed · 2 Comments 

So the dust has settled on the first national at West London, and my report for RACER has been submitted… so now time to sort out my Lazy post (kinda fitting it’s taken so long for me to post, given the name, hehe).

Ok, so new season, whats new?

To be honest, not that much, all the usual suspects were up there, even with the large number of team changes going on.

In Mod, you still had Moore, Grainger and co up front. Interestingly, it seemed to take Andy a while to get into his stride, he came from being a bit middling on early sat, to TQ the final round on saturday, and then taking all three finals… maybe a case of removing some rust from the system ;) The HB proto looked good on new and old tyres, as did Glenn Domans 416, if anything it seeming more comfortable on older tyres, and spot on in the wet!

Chris G was very quick in the first two rounds with the Mi4, some 6seconds clear of the filed!  However, he didn’t have very good finals, managing to have an incident in the first turn in every one! The car also seemed to struggle a little on old rubber, a bit of similarity with RedBull F1 car.. a bit too hard on the tyres!

ProStock was pretty much a Schumacher affair, with 5 out of the top ten being the british make, albeit all bar one being Mi3.5’s. Rob West and Jay Westwood were the two to watch in this one, Jay having a bit of a mare on saturday (and almost going home!), but coming on strong in the finals to take the win.

So onto my own experience… well, it was a weekend of frustration really. In the first Q round, it was going ok until the rain arrived in the final minute, making the track really greesy. Was quite happy to see that despite that, I was 28th in round… however, it the weather did effectively loose me one “new tyre” run, as you have to start on new boots ;)

Second round, new boots again, and put in a good time to go 25th, although made a few silly errors. Third round, final set of new boots (sunday was forecast to be wet wet wet, so thought it best to use them while I could!), and went 23rd in round, although again with some silly mistakes. Still, couldn’t be dissapointed as I was lying in 16th overall overnight!

A KFC, 3 Buds, and a kip in the car later… it was sunday morning, and suprise suprise, it was damp!

However, by the time everything got going there was potential for it jut to be damp, rather than fully wet. Being in heat 6, I was paying close attention to the weather…  lo and behold, it changed it’s mind 5mins before the run. Cue a rapid change from dry electrics to wet ones… and thats when I had the biggest issues of the weekend! Managed to pop the negative wire off the battery plug by reverse connecting it in a rush (something I’ve now solved with a bit of red heat shrink rather than black). Thankfully the speedo still worked, but with no soldering iron on, it was a case of tape it in place and hope.

Amazingly, it lasted 3mins, until I barrell rolled it out of the first turn, and with the tape being damp, end of run. I was hoping though that I would have got a score in, but on returning the pits, discovered that I’d also plugged in the PT the wrong way round, so it wasn’t counting…. chalk that up to the rush before the start :(

Anyway, the final qualy the rain decided that it wanted to make a proper job of it for a short time at least, with puddles everywhere. With all the wet electrics in the car, a bit of an increase in ride-height, and wet tyres on, away we went. quite simply, the car was great in the wet, ending up 3rd in the heat, and 15th in round! If only I’d done the same in round4.. who knows.

With the scores on the doors, turns out that some people had had even more inconsitent meetings (I always seem to fall foul of this in Rnd by Rnd), and despite counting a 25, 23, and 15.. I was pole in the D, dropping 15 places from the overnight, grrrr!!!!

The finals were fun though. I struggled a little in the first one, mainly as other guys around me had saved a set of new tyres for the finals. Despite how good the car was on the older boots, there was a deffinate advantage to running new ones. Posted the fastest lap time, but just pushed too hard, and ended up 3rd.

Second final was unbelivable really, impressed even myself. Got the most fantastic start ever, and the car just was working exceptionally well from the off. First lap was 2s faster than anyone else, and by the end of the race I was 4 up the road, even after having backed off a bit in the final minute. And if I thought that was good the next final would be some of the most fun racing I’d had in ages…

Basically, the rain came back right before the run, not heavily but enough to make the track very damp. If I’d have known how bad it was, I’d have gone with wet tyres (and maybe even starting at the back), but at the time it didn’t look too bad. BIG mistake :p It was very obvious from the first turn, when the car just decided turning wasn’t going to happen. Sorex32’s and wet tarmac are not comfortable bed fellows.

However, it turned out to be very fun, as for lap after lap, myself and Steve Lander were battling for 1st. I was quite a bit faster, but couldn’t find a way past, Steve making it really difficult. I did manage to get by cleanly once, but had taken a bit too much kerb, and was requested to give the spot back. Ended up finishing 2nd, but it was someone else’s turn to have a PT issue, as Steve’s only recorded nine laps, and I bumped up to 1st, winning the D, wOOp!

So a nice new plastic trophy on the shelf (hmm), and on to Halifax. Knowning roughly where I am now, I reckon a B final place at one of the rounds is the target… I just hope it’s dry!

Written by ed.

Tamiya M-05 Mini Video

May 20, 2009 · Posted in News, Videos · by simon · 4 Comments 

I’m getting far too excited by the prospect of the new Tamiya M05!

YouTube Preview Image

I lent Tamiya my country house for the filming, but they didn’t even give me a kit for the trouble!

They said, “No way Crabb-san, you buy your own! You don’t buy enough of our plastic kits as it is…”

Fair enough, I’m no kit collector…

Sweet video in the end though, and if you don’t chair dance to the cute music, you’re not actually alive!

Written by simon.

New Tamiya Mini – M05

May 12, 2009 · Posted in News · by ed · Comment 

So it’s been a while (10 years in fact!) but Tamiya are due to be releasing their new FWD mini very soon!

M05 Pro

Tamiya USA has this to say about the new car;

After 10 years since the release of the first M-series R/C car, Tamiya is now releasing the latest M-05 chassis with the popular Rover Mini Cooper racing version body.

  • This is a 1/10 R/C assembly kit.
  • Length: 315mm, Width: 167mm, Height: 135mm.
  • The very popular Mini Cooper Racing car comes loaded on the new M-05 chassis.
  • The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.
  • The 3-piece tie-rod steering linkage offers sharp cornering performance.
  • Sticker sheet included.
  • Includes 60D radial tires and silver Rover Mini Cooper wheels.
  • ESC and type 540 motor included.
  • A wide variety of Option Parts for M-05 chassis machines and bodies are already available for further customization.
  • Tamiya USA M05 Info

    Looks like they are also going to release an M05 Pro version at the same time, much to the same vein as the M03-R (the image above is infact the M05 Pro).

    Tamiya USA M05 Pro Info

    The car looks good… and with the laid down front shocks, mush lower shells can be used… awesome! There’s been some great ones out from ABC recently that won’t fit and M03, but should fit this :)

    For me the Pro is the version to get, but then again, I’m a hop-up/pimping’ aholic :p

    Written by ed.

    Moore-Speed Type B-C Bodyshell

    May 8, 2009 · Posted in Reviews, Touring Cars · by simon · 3 Comments 
    Moore-Speed Type B-C Shell

    Moore-Speed Type B-C Shell

    This shell looks really interesting. I want to try one. I’ve asked my LHS to get me one.

    Hot Bodies describe it as being “designed for aggressive steering and high top speeds, as well as stability in the turns.”

    I love the idea of the wide wing-mounts, and I do need a front-endy shell for my 415, it lacks steering (in comparison to a 416), and I personally like how the ol’ DNA shell handles, despite how unfashionable (and knackered) it is.

    Full details on the Hot Bodies site.

    Written by simon.

    Next Page »